InFocus IN5132 User Manual page 84

NETWORK menu
Item
MY IMAGE
AMX D.D.
(AMX Device
Discovery)
(continued on next page)
84
Select this to display the MY IMAGE
menu.
Use the application to transfer the
image data. It can be downloaded
from the InFocus website.
(www.infocus.com/support).
Use the ▲/▼ buttons to select a still MY IMAGE image (4. My
Image Function in the Network Guide) and the ► or ENTER button
to display the image.
• If no images have been saved, you cannot select an image.
• Only 16 characters of the image names can be displayed.
To switch the displayed image
Use the ▲/▼ buttons.
To return to the menu
Press the ◄ button on the remote control.
To erase the displayed image and its source file in the projector.
(1) Press the RESET button on the remote
control while displaying the image in the MY
IMAGE DELETE menu.
(2) Press the ► button to perform to erase.
To keep the image, press the ◄ button.
Use the ▲/▼ buttons to turn the AMX Device Discovery on/off.
ON ó OFF
When ON is selected, the projector can be detected by AMX
controllers connected to the same network. More information about
AMX Device Discovery, visit the AMX website.
URL: http://www.amx.com/ (as of Feb. 2012)
Description