InFocus IN5132 User Manual page 62

SCREEN menu
Item
SOURCE NAME
(continued on next page)
62
Each input port for this projector can have a name applied to it.
(1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE
NAME and press the ► or ENTER button.
The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE
NAME menu to select the port to be
named and press the ► button. The
SOURCE NAME dialog will be displayed.
The right side of the menu will remain
blank until a name is specified.
(3) Select an icon you would like to assign to
the port in the SOURCE NAME dialog.
The name assigned to the port will also
automatically change based on your icon
selection. Press the ENTER or INPUT
button to make your icon selection.
(4) Select the number you would like to
assign to the port along with the icon.
You can select the 1, 2, 3, 4 or blank (no
number assigned).
Then press the ENTER or INPUT button.
(5) If you would like to modify the name assigned
to the port, select CUSTOM NAME and press
the ENTER or INPUT button.
Description