Using The Magnify Feature - InFocus IN5132 User Manual

Using the magnify feature

1.
Press the MAGNIFY ON button on the remote
control.
The picture will be magnified, and the MAGNIFY
dialog will appear on the screen. When the
MAGNIFY ON button is pressed for the first time
after the projector is turned on, the picture will be
zoomed 1.5 times. On the dialog, triangle marks to
show each direction will be displayed.
2.
The projector's display magnification switches with every press
of the MAGNIFY ON button.
 For computer signals, HDMI
LAN, USB TYPE A or USB TYPE B ports
1.5 times  2 times  3 times  4 times  1 time
 For video signals, s-video signals, component video signals or
HDMI (Component) signals
TM
1.5 times  2 times  1 time
3.
While the triangles are displayed on the dialog, use the ▲/▼/◄/► cursor
buttons to shift the magnified area.
4.
Press the MAGNIFY OFF button on the remote control to exit magnification.
NOTE
• The MAGNIFY dialog will automatically disappear in several seconds
with no operation. To bring the menu dialog back, press the MAGNIFY ON but-
ton again.
• Magnification is automatically disabled when the signal being displayed or its
display condition changes.
• When magnification is active, keystone distortion settings may vary. They will
be restored when magnification is disabled.
• Some horizontal stripes may be visible on the image when magnification is
active.
• The MAGNIFY function is unavailable when:
- An incompatible sync signal is input.
- There is no input signal.
(RGB) signals, input signals from the
TM
Operating
MAGNIFY
ON / OFF
buttons
35