InFocus IN5132 User Manual page 48

IMAGE menu
Item
OVER SCAN
V POSITION
H POSITION
(continued on next page)
48
Using the ◄/► buttons adjusts the over-scan ratio.
Small (magnifies picture) ó Large (reduces picture)
• This item can only be selected for a video, s-video and component
video signal.
TM
• For an HDMI signal, this item can also be selected if either (1) or
(2) applies.
(1) HDMI FORMAT item in the INPUT menu for selected port is set
to VIDEO.
(2) HDMI FORMAT item in the INPUT menu for selected port is set to
AUTO, and the projector recognizes that it receives video signals.
Using the ◄/► buttons adjusts the vertical position.
Down ó Up
• Over-adjusting the vertical position may cause noise to appear on
the screen. If this occurs, reset the vertical position to the default
setting. Pressing the RESET button when the V POSITION is
selected will reset the V POSITION to the default setting.
• When this function is performed on a video signal or an s-video
signal, the range of this adjustment depends on the OVER SCAN
setting (above). You cannot adjust this OVER SCAN is set to 10.
• This function is unavailable with LAN, USB TYPE A / B or HDMI 1 /
2 port signals.
Using the ◄/► buttons adjusts the horizontal position.
Right ó Left
• Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, reset the horizontal position to the default
setting. Pressing the RESET button when the H POSITION is selected
will reset the H POSITION to the default setting.
• When this function is performed on a video signal or an s-video
signal, the range of this adjustment depends on OVER SCAN
setting (above). You cannot adjust this OVER SCAN is set to 10.
• This function is unavailable with LAN, USB TYPE A / B or HDMI 1 /
2 port signals.
Description