InFocus IN5132 User Manual page 34

Operating
Correcting the distortion (continued)
3.
Adjust the selected part as per below.
● To adjust a corner, use the ▲/▼/◄/► buttons to adjust the position of the
corner.
● <Only for IN5132, IN5142, IN5134, IN5134a, IN5144 and IN5144a>
To adjust the upper or lower side, use the ◄/► buttons to select any one
point on the side, and use the ▲/▼ buttons to adjust the distortion of the
side.
● <Only for IN5132, IN5142, IN5134, IN5134a, IN5144 and IN5144a>
To adjust the left or right side, use the ▲/▼ buttons to select any one point
on the side, and use the ◄/► buttons to adjust the distortion of the side.
● To adjust another corner or side, press the ENTER or INPUT button and
follow the procedure from step 2.
4.
This projector is equipped with a memory feature for PERFECT FIT
adjustment. Up to 3 sets of adjustments can be saved.
● SAVE:
To store the current PERFECT FIT adjustment, select one of the SAVE
icons numbered 1 to 3 (number of the memory options) with the ◄ /▲/▼
buttons and press the ENTER or INPUT button.
Remember that the currently saved memory data will be lost when saving
new data into the memory.
● LOAD:
To recall saved adjustments, select one of the LOAD icons
to 3 (number of the memory options) with the ◄ /▲/▼ buttons and press
the ENTER or INPUT button.
Remember that the current adjustments will be lost when loading new data
from memory. If you want to keep the current adjustments, save it before
performing a LOAD function.
NOTE
• <Only for IN5132, IN5142, IN5134, IN5134a, IN5144 and IN5144a>
Each corner and side can be adjusted individually but in some cases it may
be adjusted in conjunction with another corner or side. This is due to control
restrictions and is not a malfunction.
• LOAD functions are skipped when there is no linked memory data.
• There may be some noise and the image may flicker for a moment when
loading data. This is not a malfunction.
• Point at RETURN in the dialog with the ▲/▼ buttons and press the ◄ or the
ENTER button to return to the KEYSTONE menu.
34
numbered 1