InFocus IN5132 User Manual page 83

Item
PROJECTOR
NAME
(continued on next page)
(1) Use the ▲/▼ buttons on the
NETWORK menu to select the
PROJECTOR NAME and press
the ► button. The PROJECTOR
NAME dialog will be displayed.
(2) The current PROJECTOR NAME will be displayed on the first 3
lines. A projector name will be pre-assigned by default.
Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to
select and enter characters.
To erase 1 character at one time, press the RESET button
or press the ◄ and INPUT button simultaneously. Also if you
highlight DELETE or ALL CLEAR and push the ENTER or
INPUT button, you can erase one character or all characters at a
time.The PROJECTOR NAME can be up to 64 characters.
(3) To change an existing character,
press the ▲/▼ button to move
the cursor to one of the first 3
lines, and use the ◄/► buttons
to highlight the character to be
changed. After pressing the
ENTER or INPUT button, the
character is selected. Then, repeat
item (2) above.
(4) To finish entering text, move the cursor
to OK and press the ►, ENTER or
INPUT button. To revert to the previous PROJECTOR NAME
without saving changes, move the cursor to CANCEL and press
the ◄, ENTER or INPUT button.
Description
NETWORK menu
83