InFocus IN5132 User Manual page 72

OPTION menu
Item
SERVICE
(continued)
(continued on next page)
72
Selecting this item displays COMMUNICATION
menu.
In this menu, you can configure the projector's
serial communication settings using the CONTROL
port.
• Select an item using the cursor buttons ▲/▼.
Then press the ► button to open the submenu
for setting the item you selected. Or, press the ◄
button instead of the ► button to go back to the
previous menui without changing the setup. Each
submenu can be operated as described above.
• When COMMUNICATION TYPE (below) is
OFF, all other items in the COMMUNICATION
menu are unavailable except STACK.
• For serial communication functions, refer to the
Network Guide.
COMMUNICATION
COMMUNICATION TYPE
Select the communication type for transmission via
the CONTROL port.
NETWORK BRIDGE: Select this type, if an
OFF: Select this mode to receive RS-232
• OFF is the default setting.
• When you select NETWORK BRIDGE, check the
TRANSMISSION METHOD (73) settings.
Description
NETWORK BRIDGE (WIRELESS)

NETWORK BRIDGE (WIRED)

OFF
external device must be used as a network
terminal between this projector and the computer.
Select WIRELESS or WIRED as your network
connection mode.
The CONTROL port does not accept RS-232
commands (6. Network Bridge Function in
the Network Guide)
commands using the CONTROL port.