InFocus IN5132 User Manual page 56

SETUP menu
Item
STANDBY MODE
MONITOR OUT
56
Using the▲/▼ buttons switches the standby mode setting between
NORMAL and SAVING.
NORMAL ó SAVING
When SAVING is selected, the power consumption in standby mode
is lowered with some functional restrictions as per below:
• When SAVING is selected and the projector is in standby mode,
all RS-232 communication and network controls are disabled
except the power on command. If COMMUNICATION TYPE in the
COMMUNICATION menu is set to NETWORK BRIDGE, all of the
RS-232 commands are disabled (72).
• When SAVING is selected and the projector is in standby mode,
the AUDIO OUT STANDBY setting of AUDIO SOURCE (57) is
disabled, and no signal will be output from the AUDIO OUT port.
• When SAVING is selected and the projector is in standby mode,
the STANDBY setting of MONITOR OUT is disabled, and no signal
is output from the MONITOR OUT port.
• When SAVING is selected and the projector is in standby mode,
the CENTERING feature is disabled.
• <IN5142, IN5144, IN5144a and IN5145 only> When SAVING is
selected and the projector is in standby mode, the Status Monitor
and its button operation are unavailable.
While the image signal from the input
port chosen in step (1) is projected, the
image signal from the input
port selected in step (2) is output to
MONITOR OUT port.
(1) Choose a picture input port using
▲/▼ buttons.
Choose STANDBY to select the
picture output in the standby mode.
(2) Select one of the COMPUTER IN
ports using ◄/► buttons.
Select OFF to disable the MONITOR
OUT port for the input port or standby
mode chosen in the step (1).
• <IN5132, IN5142, IN5134, IN5134a,
IN5144, IN5144a only> You cannot
select COMPUTER IN1 or COMPUTER
IN2 for step (1) or step (2).
Description
<IN5132, IN5142, IN5134,
IN5134a, IN5144, IN5144a>
<IN5135, IN5145>