InFocus IN5132 User Manual page 13

Connecting your devices (continued)
NOTE • The HDMI ports of this model are compatible with HDCP (High-band-
width Digital Content Protection) and therefore capable of displaying video
signals from HDCP compatible DVD players and the like.
- The HDMI ports support the following signals:
Video signal : 480i@60, 480p@60, 576i@50, 576p@50, 720p@50/60,
1080i@50/60, 1080p@50/60
Audio signal : Format Linear PCM
Sampling frequency 48kHz / 44.1kHz / 32kHz
- This projector can be connected with other HDMI
some equipment may not be compatible with the projector and may not work
properly (for example, no video being displayed).
- Be sure to use an HDMI
- Use a Category 2-certified HDMI
the projector.
- When the projector is connected with a device with a DVI connector, use a
DVI to HDMI
TM
• The HDMI cables may become disconnected easily because there are no
TM
mechanical locks on the cables or connectors. We recommend fastening the
cables to the projector to prevent the cables from coming off (14).
(continued on next page)
(57)
(26)
cable that has the HDMI
TM
cable to connect to the HDMI
(26, 52)
(26)
TM
cable to input a 1080p@50/60 signal to
TM
input.
TM
VCR/DVD/
Blu-ray Disc
player
compatible equipment, but
logo.
TM
Setting up
TM
13