InFocus IN5132 User Manual page 77

NETWORK menu
Item Description
Use the ▲/▼ buttons to turn DHCP on/off.
ON ó OFF
Select OFF when the network does not have DHCP
DHCP
enabled. To save the setting, press the ► button.
(Dynamic Host
Configuration • When DHCP changes to ON, it takes a little time
Protocol)
to obtain the IP address from DHCP server.
• Auto IP function will assign an IP address if the
projector cannot obtain an IP address from the
server even if DHCP is ON.
Use the ▲/▼/◄/► buttons to enter the IP
ADDRESS.
This function can only be used when DHCP is
OFF.
IP ADDRESS
• The IP ADDRESS is the number that identifies
this projector on the network. You cannot have two
devices with the same IP ADDRESS on the same
network.
• The IP ADDRESS 0.0.0.0 is prohibited.
Use the ▲/▼/◄/► buttons to enter the SUBNET
MASK used by your computer.
WIRELESS
SUBNET
This function can only be used when DHCP is
SETUP
MASK
OFF.
(continued)
• The SUBNET MASK 0.0.0.0 is prohibited.
Use the ▲/▼/◄/► buttons to enter the DEFAULT
GATEWAY (a node on a computer network that
DEFAULT
serves as an access point to another network)
GATEWAY
address.
This function can only be used when DHCP is
OFF.
Use the ▲/▼/◄/► buttons to input the DNS
server address.
DNS SERVER
The DNS server is a system to control domain
names and IP addresses on the Network.
Use the ▲/▼ buttons to enter TIME DIFFERENCE.
Set TIME DIFFERENCE to match your computer.
If you are unsure what to enter, contact your IT
manager.
TIME
Use the ► button to return to the menu after
DIFFERENCE
setting TIME DIFFERENCE.
• When this item is set, TIME DIFFERENCE in the
WIRED SETUP menu will be overwritten with the
same setting (82).
(continued on next page)
77