Appendix B Safety Instructions - Advantech ADAM-4500 User Manual

Appendix B Safety Instructions

1.Please read these safety instructions carefully.
2.Please keep this User's Manual for later reference.
3.Please disconnect this equipment from AC outlet before cleaning. Don't use liquid or sprayed detergent
for cleaning. Use moisture sheet or cloth for cleaning.
4.For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily
accessible.
5.Please keep this equipment from humidity.
6.Lay this equipment on a reliable surface when install. A drop or fall could cause injury.
7.The openings on the enclosure are for air convection hence protect the equipment from overheating.
DO NOT COVER THE OPENINGS.
8.Make sure the voltage of the power source when connect the equipment to the power outlet.
9.Place the power cord such a way that people can not step on it. Do not place anything over the power
cord.
10.All cautions and warnings on the equipment should be noted.
11.If the equipment is not used for a long time, disconnect the equipment from mains to avoid being
damaged by transient overvoltage.
12.Never pour any liquid into opening, this could cause fire or electrical shock.
13.Never open the equipment. For safety reason, the equipment should only be opened by qualified
service personnel.
14.If one of the following situations arises, get the equipment checked by a service personnel:
a: The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well or you can not get it to work according to user's manual.
e. The equipment has dropped and damaged.
f. If the equipment has obvious sign of breakage.
15.DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED, STORAGE
TEMPERATURE BELOW -20° C (-4° F) OR ABOVE 60°C (140°F), IT MAY DAMAGE THE EQUIPMENT.
The sound pressure level at the operators position according to IEC 704-1:1982 is equal to or less than
70dB(A).
DISCLAIMER: This set of instructions is provided according to IEC 704-1. Advantech disclaims all
responsibility for the accuracy of any statements contained therein.