Dsc Settings - Icom IC-M423GE Instruction Manual

■ DSC Settings

D Position Entry
(See page 25)
D Add Individual ID/Group ID
D Delete Individual ID/Group ID
D Automatic Acknowledgement
These items set the Automatic Acknowledgement function to
"Auto TX" or "Manual TX."
When an Individual, Position Request, Polling Request, or
Test Call is received, the transceiver automatically transmits
an Individual Acknowledgement, Position Reply, Polling Re-
ply or Test Acknowledgement Call, respectively.
When "INDIVIDUAL ACK" is set to "Auto TX," the trans-
ceiver automatically transmits the Acknowledgment call
including "Unable to Comply" (No Reason Given) after re-
ceivng the Individual call.
q Enter either "INDIVIDUAL ACK," "POSITION ACK" or "TEST
ACK" in the DSC Settings menu.
➪ DSC Settings
MENU
(Push [MENU].) (Rotate Dial, then push [ENT].)
➪ DSC Settings
MENU
➪ DSC Settings
MENU
(See pages 22, 23)
(See page 24)
➪ Individual ACK
➪ Position ACK
➪ Test ACK
w Rotate Dial to select "Auto TX" or "Manual TX," then push
[ENT].
• Push [BACK] to cancel and return to the DSC Settings menu.
e Push [EXIT] to return to the normal operating mode.
7
DSC OPERATION
(default)
(default)
(default)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
65