Compactflash Master/Slave Jumper Settings (Jp3) - Advantech UNO-2050G User Manual

A.8 CompactFlash Master/Slave Jumper Settings (JP3)
The CompactFlash interface uses a primary IDE channel, which could be
set as the master or slave device by changing the setting of JP3.
Master Device: (Default)
JP3
Slave Device:
JP3
UNO-2050G has one internal CompactFlash card slot and one external
CompactFlash card slot. Internal CompactFlash card slot supports Com-
pactFlash type I (3mm thick) only and External CompactFlash card slot
supports both Type I and type II (5mm thick) cards
37 Appendix A