Chapter 3 Initial Setup; Insert Compactflash Card; Chassis Grounding; Figure 3.1:Chassis Grounding Connection - Advantech UNO-2050G User Manual

Lx800 500mhz automation computer with 2 x lan, 2 x rs-232, 2 x isolated rs-232/422/485,16 x isolated di/o

Table of Contents

Chapter 3 Initial Setup

The procedure for installing a CompactFlash card into the

UNO-2050G is as follows, please follows these steps carefully.

Step 1: Remove power cord.

Step 2: Unscrew four screws from the rear panel of the UNO-2050G.

Step 3: Remove the rear panel.

Step 4: Plug a CompactFlash card with user's OS and application

program into a CompactFlash card slot on board.

Step 5: Screw back the rear panel with four screws.

UNO-2050G has an aluminum material that provides good EMI protec-

tion and a stable system. Users can select if connecting power grounding

with chassis grounding with an onboard jumper selection.

UNO-2050G has onboard jumper JP2 to select if connecting chassis

ground with system's power ground. Connecting chassis ground with sys-

tem power ground: (Default)

Not connecting chassis ground with system power ground:

UNO-2050G User Manual

Figure 3.1: Chassis Grounding Connection

164.78

188.78

JP2

Table of Contents