Peak 650 User's Guide
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU will be shut off.
The Choice: Enabled, Disabled.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive will be powered down while all
other devices remain active.
The Choice: Enabled, Disabled.
Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state when the
ung
system has
The Choice: Delay 4 Sec, Instant-Off.
Wake-Up by PCI card
When enabled, you can
The Choice: Enabled, Disabled.
PowerOn by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on the modem)
awakens the system from a soft off state.
The choice: Enabled, Disabled.
USB KB Wake-Up From S3
This item will enable you to wake-up the system by USB keyboard when you shut down the computer in S3
mode.
The choice: Enabled, Disabled.
Resume by Alarm
When Enabled, your can set the date and time at which the RTC (real-time clock) alarm awakens the
system from Suspend mode.
The choice: Enabled, Disabled.
BIOS Setup
ake-up your system using a PCI rev2.2 card, when a
Rev. A
October 2000
ME# event occurring.
4-23
Need help?
Do you have a question about the PEAK650VL2B and is the answer not in the manual?