Setting The Media - Citizen CL-S400DT User Manual

Chapter 2 Printer Operation
Menu Setting Table (p.34)

Setting the Media

Media Sizes
The position of label and tag media is sensed by either a transparent
sensor or a reflective sensor.
Transparent sensor: Detects the gaps between label media and notches
of tag media
Reflective sensor: Detects the black mark
Label media
B
C
A
Label
H
Label
G
Label
Transparent sensor
A Label width
B Liner width
C Label left edge position
D Length of gap between labels
E Label length
F Label pitch
G Liner thickness
H Total media thickness
I Position of right edge of notch 3.60 (0.14)
J Position of left edge of notch
K Notch length
L Right edge of black mark
M Left edge of black mark
N Black mark width
* Use a transparent sensor for label media gaps and media with black marks.
* Use a transparent sensor for fan fold media.
* If the label pitch is 1 inch or less, set the Small Media Adjustment menu to ON
and match it to the label that uses the value of the Small Media Length menu.
21
Continuous media
Notch detection
I
L
M
I
J
Media direction
Min. value mm (inches) Max. value mm (inches)
19.50 (0.77) 118.00 (4.65)
19.50 (0.77) 118.00 (4.65)
0 (0) 2.54 (0.10)
2.54 (0.10) 812.8 (32.00)
6.35 (0.25) 812.8 (32.00)
6.35 (0.25) 812.8 (32.00)
0.06 (0.0025) 0.125 (0.0049)
0.06 (0.0025) 0.25 (0.01)
60.80 (2.39)
0 (0) 57.20 (2.25)
2.54 (0.10) 17.80 (0.70)
15.00 (0.59) 66.50 (2.62)
0 (0) 51.5 (2.02)
3.18 (0.125) 17.80 (0.70)
Black mark detection
Printed area
Re ective sensor