Connection To A Computer - Citizen CL-S400DT User Manual

Chapter 1 Setup
Serial Interface (p.57)
USB Interface (p.59)

Connection to a Computer

This product has two interfaces that can be used to receive printing
data: a serial port (RS232C) and a USB port (USB2.0). An optional internal
Ethernet or an IEEE1284 Parallel port can be added by your dealer.
To connect the cable, proceed as follows:
1. Turn OFF both power switches of the printer and the
computer.
2. Connect one end of the interface cable to the interface
connector on the back of the printer and secure it with locks
or locking screws, where available.
3. Connect the other end of the interface cable to the interface
connector on the computer and secure it with locks or
locking screws, where available.
Serial Interface Cable
Note: If the optional Ethernet or an IEEE1284 Parallel port is used,
contact your Citizen Systems dealer.
17
USB Interface Cable