Mirror Port - Moxa Technologies EtherDevice User Manual

STEP 3
Be sure to activate your settings before exiting.
•
When using the Web Browser interface, activate by clicking on the
Activate button.
•
When using the Console utility, activate by first highlighting the Activate
menu option, and then press Enter. You should receive the Set device IP
settings are now active! (Press any key to continue) message.

Mirror Port

The Mirror port function can be used to monitor data being transmitted
through a specific port. This is done by setting up another port (the mirror
port) to receive the same data being transmitted to, from, or both to and
from, the port under observation. This allows the network administrator to
"sniff" the observed port and thus keep tabs on network activity.
Take the following steps to set up the Mirror Port function:
STEP 1
Configure MOXA EtherDevice Server's Mirror Port function from
either the Console utility or Web Browser interface. You will need to
configure three settings:
MOXA EtherDevice Server User's Manual 3-55
Featured Functions