Upgrade Firmware By Console - Moxa Technologies EtherDevice User Manual

NOTE After activating the Factory Default function, you will need to
use the default network settings to re-establish a web-browser or
Telnet connection with your MOXA EtherDevice Server.

Upgrade Firmware by Console

In this section, we explain how to upgrade EDS's firmware via the
console port. Recall from a previous section in this chapter that the
console connection parameters are 115200, None, 8, 1, VT100.
STEP 1
Activate the Console Upgrade function, and then press CTRL-U to start.
STEP 2
Once the Start loading file ... message appears, you can locate the *.rom
firmware file that contains the new firmware.
MOXA EtherDevice Server User's Manual
3-70