Assigning IP Addresses to Connected Devices
When enabled, the Set device IP function allows MOXA EtherDevice
Server to automatically assign specific IP addresses to connected devices
that are equipped with DHCP Client or RARP protocol. In effect, MOXA
EtherDevice Server acts as a DHCP server by assigning a connected
device with a specific IP address stored in MOXA EtherDevice Server's
internal memory. Each time the connected device is switched on or
rebooted, MOXA EtherDevice Server sends the device the desired IP
address.
Take the following steps to use the Set device IP function:
MOXA EtherDevice Server User's Manual
3-52