Moxa Technologies EtherDevice User Manual page 81

Featured Functions
STEP 1—set up the connected
devices
Set up the Ethernet-enabled devices
connected to MOXA EtherDevice
Server for which you would like the
IP addresses to be assigned
automatically. The devices must be
configured to obtain their IP address
automatically.
The devices' configuration utility
should include a setup page that
allows you to choose an option
similar to Obtain an IP address
automatically.
For example, Windows' TCP/IP
Properties window is shown at the
right. Although your device's
configuration utility may look quite a
bit different, this figure should give
you some idea of what to look for.
You also need to decide which of
MOXA EtherDevice Server's ports
your Ethernet-enabled devices will be
connected to. You will need to set up
each of these ports separately, as
described in the following step.
MOXA EtherDevice Server User's Manual 3-53