Moxa Technologies EtherDevice User Manual page 23

How To Use MOXA EtherDevice Server
STEP 4
To get started, click on DHCP Options and then chose Scope from the pull
down menu.
STEP 5
Once the Create Scope (Local) window opens (see below), you will be
required to input a range of IP addresses in the IP Address Pool.
There is also an Exclusion Range used to prevent the DHCP Server from
issuing addresses to existing devices that have already been assigned IP
addresses from this range. By using the Add and Remove buttons, several
different ranges can be excluded, and later included.
STEP 6
Another item that must be attended to is the Subnet Mask. This is a
number that is combined with a device's IP address to determine which
subnet the device belongs to. For a Class C address you should input
255.255.255.0, and for Class B addresses use 255.255.0.0.
MOXA EtherDevice Server User's Manual
2-9