Moxa Technologies EtherDevice User Manual page 46

Monitor by Port
Access the Monitor by Port function by
expanding the Port folder, as shown to the
right. Monitor by Port has two options, All
Ports, and Porti, in which i = 1, 2, ..., 8.
The Porti options are identical to the
Monitor by Server function discussed
above, in that users can view graphs that
show All Packets, TX Packets, RX Packets,
or Error Packets activity, but in this case,
only for an individual port.
The All Ports option is essentially a graphical display of the individual
port activity that can be viewed with the Console Monitor function
discussed above. The All Ports option shows three vertical bars for each
port. The height of the bar represents Packets/s for the type of packet, at
the instant the bar is being viewed. That is, as time progresses, the
height of the bar moves up or down so that the user can view the change
in the rate of packet transmission. The red colored bar shows Uni-cast
packets, the green colored bar shows Multi-cast packets, and the blue
colored bar shows Broad-cast packets. The graph is updated every few
seconds, allowing the user to analyze data transmission activity in
real-time.
MOXA EtherDevice Server User's Manual
3-18