Telnet Console - Moxa Technologies EtherDevice User Manual

Telnet Console

You may use Telnet to access MOXA EtherDevice Server's console
utility over a network.
NOTE Before accessing the console utility via Telnet, first connect one
of MOXA EtherDevice Server's RJ45 Ethernet ports to your
Ethernet LAN, or directly to your PC's Ethernet NIC. You should
be able to establish a connection by using either a
straight-through or cross-over Ethernet cable. However, if you
experience connection difficulties, refer to the Auto MDI/MDI-X
Connection section from Chapter 4 of the Hardware Installation
Guide for more information about the different types of Ethernet
cables and ports.
NOTE MOXA EtherDevice Server's default IP is: 192.168.127.253
Use the following procedure to access the console utility via Telnet.
1. Telnet to MOXA EtherDevice Server's IP address from Window's
Run window (or from the MS-DOS prompt).
MOXA EtherDevice Server User's Manual
3-8