Configuring Snmp Settings; Viewing Current Snmp Trap Receivers; Adding An Snmp Trap Receivers - HP zl User Manual

Configuring SNMP Settings

• InfiniBand Multicast group is deleted
• InfiniBand Partition is added
• InfiniBand Partition is deleted
• InfiniBand Multicast member is added
• InfiniBand Multicast member is deleted
• InfiniBand Node is added to a partition
• InfiniBand Node is deleted from a partition
• InfiniBand Node is added to subnet
• InfiniBand Node is deleted from subnet

Viewing Current SNMP Trap Receivers

1. Launch Element Manager, if you have not already done so.
2. Select Health --> Trap Receivers.
The Trap Receivers window appears.
Any previously configured Trap Receivers appear in the window.
If the Receive Events field is set to false (as in the example above), the Receiver is not set to
receive events.

Adding an SNMP Trap Receivers

1. Launch Element Manager, if you have not already done so.
2. Select Health --> Trap Receivers.
The Trap Receivers window appears.
3. Click the Insert button.
147