Getting Started
Overview of Set-up Procedures
The information in this chapter focuses on the software and firmware aspects of the initial set-up, and
assumes that you have additional documentation for the hardware.
This chapter provides the following information:
•
Overview of entire system installation on
•
Setup procedures for the InfiniBand
Follow the steps below to configure the InfiniBand server switch system.
1. Determine your hardware topology.
2.
Install the Host Channel Adapter and drivers
3.
Install and power-on the InfiniBand Chassis
4. Configure Basic Connectivity
5. Test Network Connectivity
6. Install the Element Manager GUI
7. Access a Management System
8. Configure Partitions
(page
9. Set User Level and Access
page
9, with references to more detailed information.
™
switch.
(page
10).
(page
10).
(page
10).
(page
13).
(page
14).
(page
14).
15).
(page
18).
9
2