About Ssh - HP zl User Manual

About SSH

The available partition members appear in the right-side window.
Note that the "Available Members" refers only to members that are known to the Subnet Manager.
This includes HCAs and Switches that are already plugged into the fabric as well as manually
configured entries.
If you know the GUID and port count of an HCA that has not yet been installed, you can configure
it before it is plugged in by using the Add Other button.
8. Click on a member from the Available Member list, and use the arrow button to move it to the Full
or Limited member columns.
For information regarding Membership Types, refer to the
9. Click back to the Partitions folder (in the left-side window) when you have selected all of the
members for your Partition.
The new Partition appears in the Partition Summary window.
In addition to Telnet, the CLI can be accessed via the Secure Shell (SSH2) protocol to enable a secure
session. This provides strong authentication and secure communications over insecure channels. This
protects the system against common security attacks, such as IP spoofing, IP source routing, and
interception of clear-text passwords.
"Membership Types" on page
59
54.