Activate An Image - HP zl User Manual

100
Topspin-270> enable
Topspin-270# config
Topspin-270(config)# interface mgmt-ether
Topspin-270(config-if-mgmt-ethernet)#ip address 10.3.102.8. 255.255.0.0
Topspin-270(config-if-mgmt-ethernet)#gateway 10.3.0.1
Topspin-270(config-if-mgmt-ethernet)#no shutdown
Topspin-270(config-if-mgmt-ethernet)# exit
Topspin-270 (config) # exit
Topspin-270> enable
Topspin-270# copy
Topspin-270#
image:Topspin270-TopspinOS-2.0-build397.img
*****************operation completed successfully
Topspin-270#
Topspin-270# dir image
======================================================================
======================================================================
slot date-created
----------------------------------------------------------------------
1 Mon Aug 11 22:41:19 2003
Topspin270-TopspinOS-2.0-build397.img

Activate an Image

Topspin-360#install image:image-file-name.img
Directory management is automatically performed on the InfiniBand system, so do not include path
information for files on the chassis.
1. (Optional) If you are using In-Band Management, configure the ethernet management interface (if
you have not already done so).
2. In the privileged-execute mode, enter the
information.
The "remote system" must be the IP address of the TFTP server.
Syntax:
tftp://
<remote-system>/<filepath> <filesystem>:<filename>
Example:
copy tftp://@
10.10.20.78/tftp dir/Topspin270-TopspinOS.img
3. (Optional) View the images by using the
Existing Boot-Images on System
4. Continue on to "Activate an Image" on page 100
After downloading the image file to the chassis controller, it must be installed to become active. The
install command installs the specified image file into the system.
To install an image file:
1. In the privileged-execute mode, enter install image:name of file
• Image files must reside in the image file-system
• The file name must have the .
• All cards must have an oper-status of "Up"
Syntax:
copy
dir image
size file-name
29830309
extension
img
command with the remote system and path
command.
to install the image.