Configuring An Infiniband Management Ip Address; Configuring The System Hostname - HP zl User Manual

12
Login: super
Password: super
Topspin-360>
Topspin-360> enable
Topspin-360#
Topspin-360# configure
Topspin-360(config)#
Topspin-360(config)# interface mgmt-ib
Topspin-360(config mgmt-ib)# ip address 10.3.102.20 255.255.255.0
Topspin-360(config mgmt-ib)# gateway 10.3.0.1
Topspin-360(config mgmt-ib)# no shutdown
Topspin-360(config mgmt-ib)# exit all
Topspin-360> ping 10.3.102.34
sending 5 ICMP Echos to 10.3.102.34, 56 data bytes
!!!!!
Success rate is 100 percent (5/5)
round-trip min/avg/max = 0.000000/0.000000/0.000000 ms
Topspin-360>
Topspin-360(config mgmt-ethernet)# exit
Topspin-360# copy running-config startup-config
To login via SSH:
1. Use an SSH client (e.g. Putty) to port 22.
Configuring an InfiniBand Management IP
Address
To configure an In-band InfiniBand management IP address:
1. At the Login: prompt, enter the username and password. The default is super and super.
2. At the CLI prompt, enter enable. This enters the privileged-execute mode, as indicated by the #
sign.
3. Enter configure to enter the configuration mode.
4. Enter the interface to be configured, and set the IP and mask addresses.
5. Set the default gateway address. The gateway address refers to the address of the internal port.
6. Enable the IB management port.
7. Test IP connectivity by pinging an InfiniBand host on the other side of the gateway.
8. Save the configuration by using the copy command, or wait until you execute the reload command.
You will be prompted to save the unsaved configuration changes. .
You are now ready to power down the chassis and mount it. Later, you can configure the box via
Telnet, SSH, or the Element Manager.

Configuring the System Hostname

The Topspin system allows you to assign a hostname to the system for management purposes.