View The Internal Chassis Topology - HP zl User Manual

View the Internal Chassis Topology

The Specify Devices dialog box appears.
3. Click the Add button to add another connected InfiniBand device to the Topology view.
The Add dialog box appears.
4. Enter the DNS name or the Management-Ethernet port IP address of the InfiniBand device in the
Device Name or IP Address field.
5. Enter the SNMP Community string for the InfiniBand device.
6. Check or uncheck the Device is Enabled box.
If the connected chassis is running and you want it included in the Topology Manager, check the
Device is Enabled toggle. You can also enable this later by going back to the Specify Device
window.
7. Click the Add button.
8. The connected device is added to the Topology view.
1. Select InfiniBand --> Topology.
The Specify Devices dialog box appears (if this is a new Element Manager session).
2. Click the OK button.
127