Set Configurations For The Master Sm; Set Configurations For The Backup Sm - HP zl User Manual

Topspin-360> enable
Topspin-360# config
Topspin-360(config)# ib sm subnet-prefix fe:80:00:00:00:00:00:00:00:00
master-poll-interval 1
Topspin-360> enable
Topspin-360# config
Topspin-360(config)# ib sm subnet-prefix fe:80:00:00:00:00:00:00:00:00
master-poll-retries 2
Topspin-360> enable
Topspin-360# config
Topspin-360(config)# ib sm subnet-prefix fe:80:00:00:00:00:00:00:00:00
max-active-sms 0
Topspin-360> enable
Topspin-360# config
Topspin-360(config)# ib sm subnet-prefix fe:80:00:00:00:00:00:00:00:00
max-backup-sms 4
Topspin-360> enable
Topspin-360# config
Topspin-360(config)# ib sm subnet-prefix fe:80:00:00:00:00:00:00:00:00
session-timeout 30

Set Configurations for the Master SM

1. Enter the config ib sm subnet-prefix <prefix> master-poll-interval <1..60> command to change
the interval (in seconds) at which the master SM polls an active slave SM to verify synchronization.
The default is 3 seconds.
Example
2. Enter the config ib sm subnet-prefix <prefix> master-poll-retries <1..10> command to specify
the number of unanswered polls that cause the slave to identify the master as dead.
Example
3. Enter the config ib sm subnet-prefix <prefix> max-active-sms <0.9999> command specify the
maximum number of standby SMs that the master supports. Backup SMs are not considered
"active."
Example

Set Configurations for the Backup SM

1. Enter the ib sm db-sync subnet-prefix <prefix> max-backup-sms <int> command to enter the
maximum number of backup subnet managers with which the master subnet manager will
synchronize.
Example
2. Enter the ib sm db-sync subnet-prefix <prefix> session-timeout <1..30> command to specify the
timeout in seconds, for receiving a synchronization session status packet, in order to maintain
synchronization.
The default is 10, and the possible entries are 1...30 seconds.
Example
85