Installing the SAN Switch 2/8
Optional HP System/e Rack
This section lists instructions for installing the SAN Switch 2/8 in the optional HP
System/e Rack.
Items Required for the HP System/e Rack
The HP System/e Rack Kit consists of the following items:
36
HP System/e Rack Rail Kit, part number A7340-87901
Plenum, part number A7346-00001
HP System/e Rack Rail Kit Hardware, part number A7340-87902, shown
next:
(2) Rear mounting bracket
(8) #8-32 x 5/16 Phillips pan-head screw with captive star
lock washer
(8) #8 Flat washer
(6) M5 Torx head screw with captive lock washer
(2) Rubber washer
(4) M5 U-type tinnerman clip
hp StorageWorks SAN Switch 2/8 Installation Guide