Table of Contents
Advertisement
Installing the SAN Switch 2/8
If the timer expires while trying to access Web Tools (for example, Zone Admin,
Switch Admin, or Switch View), an HTML file similar to license.htm appears,
stating that Web Tools is disabled. In addition, a prompt displays (see
allowing you to install the optional Fabric license. After the Full Fabric license is
installed, all Web Tools functionality resumes.
Figure 4: Full Fabric license install prompt in Web Tools
Violation Timer Errors
The violation timer begins decrementing when the four switch limitation is
exceeded. The timer is cumulative. Resetting the power cycle will not reset the
timer.
If the switch is moved to a fabric with less than five switches, the error condition
is cleared; however, the violation timer stops counting down. If the switch is
moved to a fabric with more than four switches, the violation timer continues from
where it left off. When the accumulative violation timer reaches 45 days (not
configurable), Web Tools for that switch is disabled. A message similar to
Figure 4
Note:
license installed, the four switch limitation warning messages display. If the IV_FABRIC
license is not installed, Quiet Mode works as described in the
OS V3.0.x/V4.0.x Reference Guide
26
displays in a telnet session or error log.
When Quiet Mode is enabled on a SAN Switch 2/8 EL with a IV_FABRIC
.
hp StorageWorks SAN Switch 2/8 Installation Guide
Figure
4)
hp StorageWorks Fabric
Advertisement
Table of Contents
