Table of Contents
Advertisement
Managing the SAN Switch 2/8
Interpreting LED Activity
SAN Switch 2/8 activity and status can be determined through the activity of the
LEDs on the switch. The LEDs will flash green, yellow, or orange while the
switch is booting and while POST or other diagnostic tests are running. This is
normal and does not indicate a problem.
Note:
about the error log, refer to the
Guide
Front Panel LEDs
The SAN Switch 2/8 front panel includes the following LEDs:
Table 4
60
Any errors related to LED activity are listed in the error log. For information
.
One power switch LED on the front panel
One port status LED above and to the left of each of the 8 ports
One port speed LED above and to the right of each of the 8 ports
describes how front panel LEDs communicate switch status.
hp StorageWorks Fabric OS V3.0.x/V4.0.x Procedures
hp StorageWorks SAN Switch 2/8 Installation Guide
Advertisement
Table of Contents
