Replacing The Rear Panel - Fujitsu PRIMERGY MX130 S1 Operating Manual

Replacing the rear panel

► Open the casing (see "Opening the casing").
► Remove the cross-piece
► Disconnect the power supply connector (1) from the mainboard and the drives.
► Tilt the power supply forward in the direction of the arrow (2) so that the lug (a) unhooks.
► Carefully lift the power supply out of the casing in the direction of the arrow (3) and lay it next to
the device.
Rear panel for low-profile boards
► Remove the four screws (1).
► Pull the rear panel from the casing in the direction of the arrow (2).
Fujitsu Technology Solutions
see "Removing the cross-piece").
(
1
2
1
System expansions
3
2
a
1
43