Your Primergy Mx130 S1; Target Group For This Operating Manual - Fujitsu PRIMERGY MX130 S1 Operating Manual

Your PRIMERGY MX130 S1...

... is an AMD-based server for workgroups and small networks. The server is suitable for file server
services and as an application, information or Internet server. The PRIMERGY MX130 S1 offers a
high level of data security and availability thanks to sophisticated hardware and software
components.
It is available in a variety of configurations which differ in terms of the hardware and software used.
You can install accessible drives (for example, a DVD drive) and other modules.
Using the supplied "Drivers & Utilities" DVD or the "ServerView Suite" DVD, you can configure and
administer your PRIMERGY server quickly and to suit your specific requirements. User-friendly
menus are provided for installing the server operating systems.
The device is service-friendly and has a modular design which means it can be maintained quickly
and easily.
Security functions in the BIOS Setup and on the mainboard protect the data on the server from being
manipulated. Thanks to the supported RAID levels, the hard disk drive controllers offer error
tolerance through data redundancy for users requiring complete protection for their valuable data.
This manual tells you how to start up your device and how to operate it for daily use. This manual
applies to all configuration levels. Depending on the chosen configuration level, some of the
hardware components described may not be available on your PC. Please also read the notes about
your operating system.
In standard configurations, the PRIMERGY MX130 S1 has a power management system which,
when in power-saving mode, reduces the power consumption to less than 65 W. With this level of
power management, the server fulfils the conditions of the U.S. Environmental Protection Agency
(EPA) (see Section "Energy Star").

Target Group for this Operating Manual

The operating manual is intended for persons who are responsible for installing the hardware and
operating the device in the proper manner. The operating manual describes how to start up and
operate the PRIMERGY MX130 S1.
To understand the manual, you require knowledge of hardware and data transmission as well as a
basic knowledge of the operating system used. A knowledge of English is also required.
Fujitsu Technology Solutions 1