Energy Star - Fujitsu PRIMERGY MX130 S1 Operating Manual

Energy Star

In standard configurations, the PRIMERGY MX 130 S1 server fulfils the stringent
requirements of the ecolabel Energy Star for computers in version 5.0. These
requirements guarantee that computers save power: when the system is in
operation and processing different tasks, when switched off or in standby mode.
This means, for example, that the power consumption of the PRIMERGY MX 130
S1 when the system is in the "Idle" operating state is below 65 W.
ENERGY STAR certified and labelled products are always set up to meet the full
requirements of the standard when shipped. Please note that installation of after-
market software and changes to the BIOS or power options may affect power
consumption. This may mean that the properties of the device guaranteed by the
ENERGY STAR label will no longer apply.
The process for reading out the measured values including for the current power
consumption and air temperatures is described in the "ServerView Operations
Manager" user manual. The Performance Monitor or Task Manager can be used
to read out the CPU usage.
The system features a hibernate mode (S4 mode) from which it can be "woken up" i.e. re-activated
by means of a WOL (Wake-up On LAN) function. So that this feature can be used, however, the S4
mode in the installed operating system must be activated or unlocked.
The following description is intended as an example and can only be used for other operating
systems as a reference point.
To switch your system to S4 mode (= hibernate mode), the following steps must be carried out:
Fujitsu Technology Solutions
Important notes
9