Indicators On The Device - Fujitsu PRIMERGY MX130 S1 Operating Manual

Table of Contents

Indicators on the device

The indicators are on the front of the casing. Which indicators are available on your device depends

on the configuration level you have selected.

1 = CD-ROM or DVD indicator

2 = Power-on indicator

1 - CD-ROM or DVD indicator

The indicator lights up when the CD-ROM or DVD drive of the device is accessed. You must never

under any circumstances remove the CD/DVD while the indicator is lit.

2 - Power-on indicator

–

The indicator is green:

the device is switched on.

–

The indicator lights up orange or flashes green:

the device is ready for operation or in power-saving mode. After being switched on with

the ON/OFF switch, the device powers up or returns to the state it was in before it entered

power-saving mode.

In power-saving mode, the device must not be disconnected from the mains supply,

otherwise data loss may occur.

Fujitsu Technology Solutions

The indicator can also light up green if the device has been switched off as a

result of depressing the ON/OFF switch for a few moments (see "The device

cannot be switched off with the ON/OFF switch").

QQQQQQQQQQQQQQQQQQQ

3 = Hard disk indicator

Preparing for use

Table of Contents

Show Quick Links

Table of Contents