Inch Bay - Fujitsu PRIMERGY MX130 S1 Operating Manual

System expansions
Installing and removing two 2½ inch hard disk drives and an
optical drive (slim-line) in a slim-line 5¼ inch installation
frame capable of accommodating a hard disk in a 5¼ inch bay
With the slim-line 5¼ inch installation frame capable of accommodating a hard disk, the installation
and removal procedures are almost identical to the procedures for installing and removing an
accessible 5¼ inch drive. Special features are referred to below.
For the installation, you require the additional 3½ inch installation frame in which you install
i
both hard disks, see chapter "Installing and removing two 2½ inch hard disk drives in
additional 3½ inch installation frames".
Removing drives
► Remove the 5¼ inch installation frame in the same way as a 5¼ inch drive (see "Installing and
removing an accessible 5¼ inch drive").
1
► Remove the screws (1).
► Pull the 3½ inch installation frame with the two 2½ inch hard disks (a) out of the 5¼ inch
installation frame in the direction of the arrow (2).
► Pull the optical drive (slim-line) (b) in the direction of the arrow (3) out of the 5¼ inch installation
frame.
68
1
1
1
2
2
a
b
3
1
1
1
Fujitsu Technology Solutions