Preparing for use
Ports on the device
The ports are located on the front and back of the device. The ports available on your device depend
on the configuration level you have selected. The standard ports are marked with the symbols shown
below (or similar symbols). More precise information regarding the position of the ports is provided in
the manuals for the boards.
PS/2 keyboard port, purple
Serial interface, turquoise
Monitor port, blue (via adapter to DVI-I
port)
USB - Universal Serial Bus, black
Some of the connected devices require special software (e.g. drivers) to be installed and
i
set up (refer to the documentation for the connected device and operating system).
Connecting a monitor
►
Follow the instructions contained in the monitor manual to prepare the monitor for operation
(e.g. connecting cables).
►
Connect the data cable to a suitable monitor port of the device (DVI-I or VGA via adapter on
the DVI-I).
Connecting the mouse
Depending on the equipment level selected, your device will be supplied with a PS/2 mouse or a
USB mouse.
Connecting a PS/2 mouse
►
Connect the PS/2 mouse to the PS/2 mouse port
Connecting USB mouse
►
Connect the USB mouse to the USB port
18
PS/2 mouse port, green
LAN
LAN port
DVI-I port
of the device.
of the device.
Fujitsu Technology Solutions