Fujitsu PRIMERGY MX130 S1 Operating Manual page 58

System expansions
No. Bay
1 3½ inch bay
below the power
supply
2 3½ inch bay at
the front of the
device
3 5¼ inch bay at
the front of the
device
50
Installation Alternatives
a 3½ inch hard disk drive
with additional 3½ inch
installation frame:
two 2½ inch hard disk drives
a 3½ inch hard disk drive
with additional 3½ inch
installation frame:
two 2½ inch hard disk drives
an accessible 5¼ inch drive
With a 5¼ inch installation
frame capable of
accommodating a hard disk and
an additional 3½ inch
installation frame:
two 2½ inch hard disk drives
With a slim-line 5¼ inch
installation frame capable of
accommodating a hard disk and
an additional 3½ inch
installation frame:
an accessible drive (slim-line)
and two 2½ inch hard disk
drives
Chapter in the manual
See "Installing and removing hard disk
drives in a 3½ inch bay below the
power supply"
See "Installing and removing two 2½
inch hard disk drives in additional 3½
inch installation frames"
and
"Installing and removing hard disk
drives in a 3½ inch bay below the
power supply"
See "Installing and removing drives in a
3½ inch bay at the front of the device"
See "Installing and removing two 2½
inch hard disk drives in additional 3½
inch installation frames"
and
"Installing and removing two 2½ inch
hard disk drives in a 3½ inch bay at the
front of the device"
See "Installing and removing an
accessible 5¼ inch drive"
See "Installing and removing two 2½
inch hard disk drives in a 5¼ inch
installation frame capable of
accommodating a hard disk in a 5¼
inch bay"
See "Installing and removing two 2½
inch hard disk drives and an optical
drive (slim-line) in a slim-line 5¼ inch
installation frame capable of
accommodating a hard disk in a 5¼
inch bay"
Fujitsu Technology Solutions