Longhand Programming - Avaya 2420 User Manual

7. To select the display key against which to program the new function, press
Caution

Do not select the slot used for the Admin function. Replacing this function will lock the
phone for further programming until reset through the phone system.
8. If the display slot is not already used, the display shows BUTTON PROGRAMMED!.

To end programming, press

To continue programming other functions, press
9. Repla, Keep and Delet are shown along the right-hand edge of the display.

To replace that existing function with the one just programmed, press Repla
BUTTON PROGRAMMED! is displayed.

To keep the existing function and forget the function just programmed, press Keep

To delete the existing function and forget the function just programmed, press Delet

Longhand Programming

1. Press Admin. See Display Key Programming.
2. To switch to longhand programming mode, press Expl?
3. Press Next
4. If the function requires some data to be entered, [ ] is shown at the bottom of the display. Enter
the data using the normal phone keypad. The upper part of the display reverts to showing the
functions currently assigned to
5. To move between the pages of display keys, press
6. To select the display key against which to program the new function, press
Caution

Do not select the slot used for the Admin function. Replacing this function will lock the
phone for further programming until reset through the phone system.
7. If the display slot is not already used, the display shows BUTTON PROGRAMMED!.

To end programming, press

To continue programming other functions, press
9. If the display slot already has a programmed function, the display shows FEATURE ON
BUTTON. Repla, Keep and Delet are shown along the right-hand edge of the display.

To replace that existing function with the one just programmed, press Repla
display then shows BUTTON PROGRAMMED! as above.

To keep the existing function and forget the function just programmed, press Keep

To delete the existing function and forget the function just programmed, press Delet
2420 and 5420 User Guide
IP Office 4.0
until the required function required is shown, then press Selct
and
EXIT.
Cont.
.
.
and .
EXIT.
Cont.
15-601077 Issue 8 (11th December 2006)
Function Keys
or .
.
.
.
.
or .
. The
.
.
Page 31