Connecting Your Phone's Power - Cisco SPA 525G User Manual

Installing Your Phone

Connecting Your Phone's Power

STEP 5
Connecting Your Phone's Power
NOTE
Cisco Small Business IP Phone SPA 525G User Guide (SIP)
Hang onto screws mounted in the wall.
If you are using an external power source, plug it into the building's power source, and plug
the power supply into the phone base. See
If you are not using Power over Ethernet (PoE), you must use the PA-100 power supply AC
adapter.
If you are using Power over Ethernet (PoE) to power the phone, the phone will receive power
when you connect an Ethernet cable from the phone's WAN port to a switch in your network
that provides PoE. See the
page 28.
Figure 1 on page
"Connecting Your Phone to the Wired Network" section on
23, item #2.
2
27