Connecting Your Phone's Power - Cisco SPA 525G User Manual

Installing Your Phone

Connecting Your Phone's Power

STEP 4
STEP 5
Connecting Your Phone's Power
NOTE
Cisco Small Business IP Phone SPA 525G/SPA 525G2 (SPCP) User Guide
Plug in the Ethernet and power cables.
Hang onto screws mounted in the wall.
If you are using an external power source, plug it into the building's power source,
and plug the power supply into the phone base. See
The Cisco SPA 525G/525G2 does not ship with a power supply. If you are not using
Power over Ethernet (PoE), you must order the PA-100 power supply separately
from Cisco.
Figure 2 on page 21, item #2.
2
26