Installing Your Phone
Connecting Your Phone's Power
STEP 5
Connecting Your Phone's Power
Cisco Small Business Pro IP Phone SPA 525G (SIP) User Guide
Hang onto screws mounted in the wall.
If you are using an external power source, plug it into the building's power source,
and plug the power supply into the phone base. See
If you are using Power over Ethernet (PoE) to power the phone, the phone will
receive power when you connect an Ethernet cable from the phone's WAN port to
a switch in your network that provides PoE. See the
Wired Network" section on page
NOTE: The Cisco SPA 525G does not ship
with a power supply. If you are not using Power
over Ethernet (PoE), you must order the PA-100
power supply separately from Cisco.
27.
Figure 1 on page
22, item #2.
"Connecting Your Phone to the
2
26