Making A Mobile Phone Call Using Your Cisco Spa 525G - Cisco SPA 525G User Manual

Using Advanced Phone Features
Using the Cisco SPA 525G With Your Bluetooth-Enabled Mobile Phone
NOTE
STEP 1
STEP 2
NOTE
Cisco Small Business IP Phone SPA 525G User Guide (SIP)

Making a Mobile Phone Call Using Your Cisco SPA 525G

When you make a mobile phone call using your Cisco SPA 525G, your Cisco SPA 525G acts
as a handsfree device for your phone. The call is made through your mobile phone, but the
audio is present on the Cisco SPA 525G and the call control is done using the Cisco SPA 525G,
unless you switch back to your mobile phone. (See
525G to Your Mobile Phone" section on page
Not all mobile phones support this function. See the list of Bluetooth-enabled mobile phones
supported with the Cisco SPA 525G that is posted at the Cisco support community at
www.cisco.com/go/smallbizsupport, and also consult the latest Cisco SPA 525G release notes
available at cisco.com.
Press the line button associated with your mobile phone (the line button is marked with a
mobile phone icon with a flashing lightning bolt).
Do one of the following:
• Enter a number to dial and press the Dial softkey.
• Press the Directory softkey and select Personal Address book. Choose a number and
press the Dial softkey.
• Scroll to select a recently-called number and press the Select button.
If you usually enter a digit before dialing (such as 9 to reach an outside line), remember that this
call is made through your mobile phone. You should follow the usual practice for making calls
on your mobile phone (for example, you probably do not dial a digit to reach an outside line on
your mobile phone).
"Switching Audio from Your Cisco SPA
75.)
4
http://
73