Configuring Call Forwarding - Cisco SPA 525G User Manual

Using the Web Interface

Configuring Call Forwarding

STEP 1
STEP 2
STEP 3
STEP 4
NOTE
Configuring Call Forwarding
NOTE
STEP 1
STEP 2
STEP 3
Cisco Small Business IP Phone SPA 525G User Guide (SIP)
To set Do Not Disturb:
Log in to the web interface.
In the Voice tab, User menu, under Supplementary Services, locate the Do Not Disturb
field.
Choose Yes to turn on Do Not Disturb.
At the bottom of the page, click Submit All Changes. Your phone reboots.
You can turn off Do Not Disturb from your phone or from the web interface.
8x8 recommends using Virtual Office online call forwarding
Setup, page 43) instead of phone-based call forwarding so that your call forwarding instructions
are stored online instead of on your phone. If you set your call forwarding rules on your phone,
they will not be in effect if your phone is disconnected from an Internet connection.
Log in to the web interface.
In the Voice tab, User menu, under Call Forward, you can configure the following fields:
• CFWD Setting—Enables call forwarding.
• CFWD All Dest—Forwards all calls to a single number that you enter.
• CFWD Busy Dest—Forwards all calls to another number when the phone is busy.
Enter the number to which to forward calls.
• CFWD No Ans Dest—Forwards calls to another number if there's no answer at your
phone. Enter the number to which to forward calls.
• CFWD No Ans Delay—Number of seconds to delay forwarding calls, if there is no
answer at your phone. Enter the number of seconds to delay.
At the bottom of the page, click Submit All Changes. Your phone reboots.
(Forwarding Calls — Online
5
93