Connecting Front Panel I/O And Leds - Chenbro ES340 User Manual

ES340 Chassis
User's Manual
To connect front panel I/O and LEDs:
a. USB 2.0 cable connection
1
■ Front USB cable should be connected to on-board USB
header properly depends on different M/B.
b. Front display cable connection
1
■ The display fan-out cable with different connection for:
Power on, HDD, LAN, FAIL and the front switch
c. Card reader cable connection
1
■ After installing the assembled Card Reader, the
shorter USB cable should be connected to the M/B
www.chenbro.com
2
■ Connect to the M/B according to the M/B pin header
definition properly.
(optional)
16