Connecting Devices; Connecting Sata2 Hdd; Connecting The Power - Chenbro ES340 User Manual

ES340 Chassis
User's Manual

Connecting Devices:

ES340 is pre-installed with several cables inside as factory default, which
includes:
SATA2 cable for Hot-swap hard drive
Power cable for M/B
Front panel I/O cables
USB 2.0 cable
4-in-1 card reader
To connect SATA2 Hot-swap hard drive:
1
■ Check the bundled cable with number tag
Note: If there is not enough SATA ports from M/B, users can either remove or keep the
bundled P3/P4 SATA cable.
To connect the power:
1
■ The DC harness comes with 20+4 pin as main
connection for different M/B requirement.
www.chenbro.com
(optional)
2
■ Connect the SATA cables to the M/B properly
2
■ Install and secure the DC harness cable to the M/B
properly
15