Chenbro ES340 User Manual page 17

ES340 Chassis
User's Manual
d. Slim ODD cable connection
1
■ Use power split cable in accessory pack for conversion
of DC harness, small 4P is connected to the Slim ODD
adaptor board
e. Cable management
1
■ Due to limited space inside the chassis, make sure all
cable are connected properly and use the cable tie
through the bridge land on side wall
www.chenbro.com
(optional)
2
■ Use either standard IDE cable from 3
use optional cable from Chenbro to connect to the Slim
ODD adaptor board
2
■ Tie up the cable so the cables are fixed in certain
space.
17
rd party M/B, or